Tools
-
- Class G
- Posts: 31
- Joined: Fri Aug 21, 2015 10:03 am
- Location: Vacaville (Nut Tree) California
Tools
I didn't really want to start a new subject, but I didn't see any category that my question would fit into. Anyway, question: I currently have several pneumatic rivet guns for "banging" rivets, but since the RV-12 uses "pulled rivets," does anyone have any suggestions as to what us a good pneumatic rivet puller?
-JK-
-Retired FAA/A.T.C.: SFO Tower & Bay Approach (renamed NORCAL Approach in 2002)
-Owner of a C-150/150 Texas Taildragger/Aerobat
-RV-12 kit: Empennage, Both Wings, Flight Controls, & Fuselage complete. Working on "Finish Kit"
-Retired FAA/A.T.C.: SFO Tower & Bay Approach (renamed NORCAL Approach in 2002)
-Owner of a C-150/150 Texas Taildragger/Aerobat
-RV-12 kit: Empennage, Both Wings, Flight Controls, & Fuselage complete. Working on "Finish Kit"
- TomNativeNewYorker
- Class D
- Posts: 439
- Joined: Tue Mar 21, 2006 9:19 pm
- Location: KSAV
Re: Tools
what kind of blind rivets are being installed? cherry? huck?CaptainWacoal wrote: but since the RV-12 uses "pulled rivets," does anyone have any suggestions as to what us a good pneumatic rivet puller?
-
- Class G
- Posts: 31
- Joined: Fri Aug 21, 2015 10:03 am
- Location: Vacaville (Nut Tree) California
Tools
Actually, I don't know yet. Whatever type of rivets that Van's uses in their "fastener kits." I just ordered the empennage/fastener kits on Friday, and it will probably be a week or two before they arrive. I'll let you know when the kits arrive and I learn what type of rivets they use. Maybe someone who is already familiar with the RV-12 kits can shed some light on the subject???
-JK-
-Retired FAA/A.T.C.: SFO Tower & Bay Approach (renamed NORCAL Approach in 2002)
-Owner of a C-150/150 Texas Taildragger/Aerobat
-RV-12 kit: Empennage, Both Wings, Flight Controls, & Fuselage complete. Working on "Finish Kit"
-Retired FAA/A.T.C.: SFO Tower & Bay Approach (renamed NORCAL Approach in 2002)
-Owner of a C-150/150 Texas Taildragger/Aerobat
-RV-12 kit: Empennage, Both Wings, Flight Controls, & Fuselage complete. Working on "Finish Kit"
I didn't have many blink rivets to install on my RV-7, but I was happy with this cheap rivet puller from Harbor Freight:
http://www.harborfreight.com/3-16-inch- ... 93458.html
http://www.harborfreight.com/3-16-inch- ... 93458.html
Mike Bullock
http://www.rvplane.com
RV-7 | Superior IO-360 | Whirlwind 200RV
Garmin GTN650 | GRT Dual Sport SX EFIS
Status: FLYING!
http://www.rvplane.com
RV-7 | Superior IO-360 | Whirlwind 200RV
Garmin GTN650 | GRT Dual Sport SX EFIS
Status: FLYING!