EXPBUS COMPATABILITY W/ VANS PREWIRED HARNESS
-
- Class G
- Posts: 7
- Joined: Tue Dec 09, 2008 2:19 pm
- Location: Rock, Kansas
EXPBUS COMPATABILITY W/ VANS PREWIRED HARNESS
I was looking thru the Van's accessory catalog at the pre-wired harnesses. It mentioned that the EXPBUS is not directly compatable. Does anyone have an idea what they mean by this?? Will it work with some mods or what? The pre-wired harnesses look like a huge time saver to me.[/img]
- Wicked Stick
- Class B
- Posts: 1000
- Joined: Wed Feb 09, 2005 10:00 pm
- Location: KEWB
Most builders buy Van's pre-made harness and then modify it to suit their wiring needs. That is what I did.
You probably end up a little extra of this, and not enough of that, but it is a good place to start.
I ended up with something between Van's diagrams and AeroElectrics Z drawings.
You probably end up a little extra of this, and not enough of that, but it is a good place to start.
I ended up with something between Van's diagrams and AeroElectrics Z drawings.
Dave "WS" Rogers
RV-8 (125 hrs & counting)
N173DR
RV-8 (125 hrs & counting)
N173DR
-
- Class G
- Posts: 7
- Joined: Tue Dec 09, 2008 2:19 pm
- Location: Rock, Kansas