Skin hole is fine but the rib hole is somewhat elongated. Guessing it moved as I moved some clecoes around. Is this a job for a whoops rivet or just deburr-dimple and go? Sorry no pict. available.
Thanks
Rib hole
DDG - Debur Dimple and GO!
The only issue you could have is the rivet may not set flat or it may not cover the dimpled hole(depends on how elongated). One being set like this ain't gonna have the airplane fall out of the sky! If it sets wrong and it bothers you, drill it out to a #30 and put in a OOOOPS rivet. You gotta remember that when a rivet expands, it will fill in any elongation.
The only issue you could have is the rivet may not set flat or it may not cover the dimpled hole(depends on how elongated). One being set like this ain't gonna have the airplane fall out of the sky! If it sets wrong and it bothers you, drill it out to a #30 and put in a OOOOPS rivet. You gotta remember that when a rivet expands, it will fill in any elongation.
Mike Bullock
http://www.rvplane.com
RV-7 | Superior IO-360 | Whirlwind 200RV
Garmin GTN650 | GRT Dual Sport SX EFIS
Status: FLYING!
http://www.rvplane.com
RV-7 | Superior IO-360 | Whirlwind 200RV
Garmin GTN650 | GRT Dual Sport SX EFIS
Status: FLYING!
-
captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM
CJ