Antenna cable size

aparchment · Post by **aparchment** » Wed Jul 02, 2008 4:52 pm

Guys:

What outer diameter typically is the cable used for the VOR and Glideslope antennae? 1/4"?

Antony

Post by **bullojm1** » Wed Jul 02, 2008 6:40 pm

Antony-

I just measures some RG400 I had - 0.200" diameter.

aparchment · Post by **aparchment** » Wed Jul 02, 2008 10:24 pm

Thanks Mike!

jim_geo · Post by **jim_geo** » Thu Jul 03, 2008 6:53 pm

Is it true that RG58 and RG400 are the same diameter? It seems that information I'm finding about Coax crimps is that they use the same die size.

TomC · Post by **TomC** » Fri Jul 04, 2008 1:53 pm

Antony,

Here is a site that has some specs including diameter. Hope it helps.

http://www.rfcafe.com/references/electr ... _chart.htm

Good Luck!