I need some information on how most of fellow RV'ers attached the oil door.
Van says to expose the hinge on the outside. I prefer to attach it with the hinge on the inside.
What has been the way most have done it?
Thanks
Cowl almost on.
Dave
oil door
Dave,
I made a metal oil door instead of a fiberglass one. Here's my logs:
1) Forming the oil door: http://rvplane.com/?categoryid=6&dayid=642
2) Installing the hinge: http://rvplane.com/?categoryid=6&dayid=644
3) Installing the latch: http://rvplane.com/?categoryid=6&dayid=647
Good luck!
I made a metal oil door instead of a fiberglass one. Here's my logs:
1) Forming the oil door: http://rvplane.com/?categoryid=6&dayid=642
2) Installing the hinge: http://rvplane.com/?categoryid=6&dayid=644
3) Installing the latch: http://rvplane.com/?categoryid=6&dayid=647
Good luck!
Mike Bullock
http://www.rvplane.com
RV-7 | Superior IO-360 | Whirlwind 200RV
Garmin GTN650 | GRT Dual Sport SX EFIS
Status: FLYING!
http://www.rvplane.com
RV-7 | Superior IO-360 | Whirlwind 200RV
Garmin GTN650 | GRT Dual Sport SX EFIS
Status: FLYING!