Look at my hole!
- captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM
Look at my hole!
Yah, THAT ONE! The one the pen is pointing towards.
Ummmmm, what is it for???
Looks like Van punched a #10 there for something but I am at a loss.
Anyone? Beuhler? BEUHLER?
CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
I think that on my Lycoming cylinders, there is a screw that goes in there to the cylinder head. I think that is the one I ended up putting a washer in between the head and the baffle for more cooling.
Where the Black cleco is?
Where the Black cleco is?
Brantel (Brian Chesteen),
RV12-IS, #121606, N912BC - Building Now!
RV10, #41942, N????? - Project Sold
RV-7/TU, #72823, N159SB - SOLD
RV12-IS, #121606, N912BC - Building Now!
RV10, #41942, N????? - Project Sold
RV-7/TU, #72823, N159SB - SOLD
- captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM
Yup! Okay, got it!
I am doing the scat tube screen now and with it taken apart and on the bench I was thinking it was associated with the heat somehow.
Oddly enough the way this is going together I will need to shim that corner back based on the gap that seems to be there now. Wonder if Van planned it that way?
Prolly...
Thanks!
CJ
I am doing the scat tube screen now and with it taken apart and on the bench I was thinking it was associated with the heat somehow.
Oddly enough the way this is going together I will need to shim that corner back based on the gap that seems to be there now. Wonder if Van planned it that way?
Prolly...
Thanks!
CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
- captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM
Look at my gap now!
See...
Bad picture, I know.
Kinda gaping, huh?
I thing a couple of washers perhaps!?!
CJ
Bad picture, I know.
Kinda gaping, huh?
I thing a couple of washers perhaps!?!
CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
CJ - one washer should be enough. I think my CHT for cylinder #3 dropped significantly - like 40-50 degrees!
If not, its easy to fish another washed down there if you have washer-wrenches.
If not, its easy to fish another washed down there if you have washer-wrenches.
Mike Bullock
http://www.rvplane.com
RV-7 | Superior IO-360 | Whirlwind 200RV
Garmin GTN650 | GRT Dual Sport SX EFIS
Status: FLYING!
http://www.rvplane.com
RV-7 | Superior IO-360 | Whirlwind 200RV
Garmin GTN650 | GRT Dual Sport SX EFIS
Status: FLYING!
- captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM