I have a lead on some steps for mine 9 which I failed to order with the fuse. He does not have the hardware or instructions. Wondering if someone out there has a copy they could send? Thanks
jparish@sio.midco.net
Step kit instructions and hardware list
- Joe Parish
- Class D
- Posts: 311
- Joined: Wed Apr 21, 2010 3:42 pm
- Location: Sioux Falls SD
Step kit instructions and hardware list
Joe
N525XC reserved
Empennage done
wings done
Fuse in progress
RV-9A
N525XC reserved
Empennage done
wings done
Fuse in progress
RV-9A
- Joe Parish
- Class D
- Posts: 311
- Joined: Wed Apr 21, 2010 3:42 pm
- Location: Sioux Falls SD
Ignore the instructions from Van's on the layout and spacing of the rivet holes on the external plate. You will want to adapt the layout to line up with the underlying flanges and structure. Should look something like this.
Bruce Hill
RV-9A N5771H flying over 1100 hours!
Build Log at http://www.overthehills.com/RV-9A-Project
Blog at https://flyingoverthehills.wordpress.com/
EAA Tech Counselor, A&P
RV-9A N5771H flying over 1100 hours!
Build Log at http://www.overthehills.com/RV-9A-Project
Blog at https://flyingoverthehills.wordpress.com/
EAA Tech Counselor, A&P
- Joe Parish
- Class D
- Posts: 311
- Joined: Wed Apr 21, 2010 3:42 pm
- Location: Sioux Falls SD