Alligator squeezer tooling.

A place to discuss workshops and the use and desirability of tools.
Post Reply
Philip Cobbin
Class G
Posts: 25
Joined: Fri Nov 12, 2004 8:23 am
Location: Arizona
Contact:
Contact Philip Cobbin

Alligator squeezer tooling.

Post by Philip Cobbin »

We picked up an alligator squezer a few years back at OSHKOSH and never did see how you put tooling on the rascal. I modified the jaw slightly to support the head of an AN bolt and now use a bolt fastened to a series of simple flat anvils and washers to set the tool. The alligator squezer worked great in particular for squeezing the 1/8 inch rivets at the firewall area/F-772B floor stiffeners.

Image

:roll:
Top
Post Reply

Return to “Workshop & Tools”