Need to borrow...

A place to discuss workshops and the use and desirability of tools.
Post Reply
User avatar
rv8or
Class E
Posts: 148
Joined: Fri Oct 22, 2004 1:50 pm
Location: DFW

Need to borrow...

Post by rv8or »

Does anybody have one of those "round-stock centering jigs" for drilling rivet holes in the push rods? I am just not happy with the way my "free hand" attempt turned out. Going to reaccomplish them all.

Let me know, obviously I'll pay the shipping both ways.

Thanks!

Joe
Joe Ferraro
aka: "jferraro16"
DFW, RV-8A Fuse

User avatar
bullojm1
Chief Rivet Banger
Posts: 1357
Joined: Sat Mar 25, 2006 6:37 pm
Location: KDMW
Contact:

Post by bullojm1 »

Joe,


I answered you on the "other" forum, but I will post again for other people in see. I made my own centering jig with some 2" angle and a drill press vice. It worked absolutely great. Pics and documentation are here:

http://rvplane.com/?categoryid=3&dayid=311
Mike Bullock
http://www.rvplane.com
RV-7 | Superior IO-360 | Whirlwind 200RV
Garmin GTN650 | GRT Dual Sport SX EFIS
Status: FLYING!

Post Reply