Easy fast dimples

jim_geo · Post by **jim_geo** » Tue Aug 16, 2005 2:38 am

I wanted a simple way to get at those four rivet holes on the leading edge of the emp.

While wandering around my shop I found a bar of Aluminum, drilled a hole in the end of it and wala a dimple die holder.

It works very well.

captain_john · Post by **captain_john** » Tue Aug 16, 2005 6:05 am

Nice rig! Good tip!

I did a similar thing with a small slab of steel bar, but I drilled and countersunk the bar itself.

CJ

Guest · Post by **Guest** » Fri Sep 02, 2005 7:54 pm

Check out the free upgrade on a DRDT-2 Dimpler at www.planetools.com as this unit does consistent and professional quality dimples.

captain_john · Post by **captain_john** » Fri Sep 02, 2005 8:16 pm

Ummmm, what FREE UPGRADE is that???

CJ

bmurrish · Post by **bmurrish** » Fri Sep 02, 2005 9:30 pm

Hey CJ,

A little late for you. You get a free upgrade to the DRDT-2 when you buy their RV tool kit.

cjensen · Post by **cjensen** » Fri Sep 02, 2005 10:19 pm

too late for me to, but is that an upgrade from a standard c-frame? that's a hell of a deal!

captain_john · Post by **captain_john** » Sat Sep 03, 2005 5:17 am

OIC...

I still want an upgrade!

CJ