What is anodizing, anyway? Well, I learned that anodizing is not the same thing as metal plating. It's not a coating, either. You're not adding a layer of anything to the metal. You're chemically changing it. It's an electrolytic process for producing controlled aluminum oxide films on aluminum. The electrochemical process both thickens and strengthens the naturally-occurring oxide. The resulting finish is extremely hard and exceptionally wear resistant, according to what I read. I didn't realize that you can get aluminum anodized in a rainbow of different colors!
A quick google search turned up roughly a dozen anodizing shops here in my city. Wow! I had no idea there were so many. So I grabbed all the brake pedal parts and went to the closest one, about 5 min. away, to check into it. They have a minimum shop fee of $50, as it turns out, so I prepared to leave. But the guy lowered the price and gave me a 20% discount. In retrospect, I think the best thing would be for two or three builders to go together on a batch of parts and split the cost. That would make it even more reasonable. Anyway, the company I went with is called Apex Anodizing http://www.apexanodizing.com/ if you're interested. They also have a shop in Nevada. The district manager, Jim Malnar, was very nice, helpful, and totally committed to my satisfaction. I was impressed that a small one-time customer like me would get this kind of attention from high level management.
I decided to go with the Bright Dip Fiery Red color and to have the anodizing done before riveting, so the rivets would show and contrast with the color. I really like the brassy look of the flush rivets next to this color. They're the same color as the AN-3 bolts and nuts used for the hardware. The color of the master cylinders matches the hardware and rivets, too. It's a perfect match.
After a couple of days, they were ready. I was so excited about how gorgeous the parts looked, that I set to work immediately when I got home and riveted them all together. These rivets can all be squeezed easily. Here's another close-up shot:
Tonight was our monthly Chapter 105 meeting. I finished these up just in time before heading out the door, so I took them with me for a little show-and-tell. Once a year, our chapter has one of our regular monthly meetings at Van's Aircraft. It's always one of the most popular meetings of the year. The factory is open for a walk-through tour, an update from some of the staff on what's going on at Vans, a few words of wisdom from Van, and time to hang out in the hanger and look at all the planes. To top it off, Vans provides pizza and sodas for everyone. How can you beat that? A good number of planes flew in for the event, too. We had over 80 people attend. I had fun passing these around. I got a lot of very nice comments and compliments, including one from Van himself.
Well, when I got back home, I just had to see what these pedals will look like mounted in place on the rudder pedals. Here they are, ready to go:
