small winch at loft
small winch at loft
added a small winch to the loft. could be beneficial in the future. I have an electrical junction box there so I can add an outlet for power. adequate bracing nearby, so it is stiff enough.
Steve Melton
N531EM, RV9A, Superior O-320, WW 200RV prop, Slick mags, CHT 330F, EGT 1300F, B&C, 1300+ hours
Freedom and Democracy are all that really matter.
Ride a bike, unlock the world.
https://www.rvplasticparts.com/
https://www.gpsdock1.com/
N531EM, RV9A, Superior O-320, WW 200RV prop, Slick mags, CHT 330F, EGT 1300F, B&C, 1300+ hours
Freedom and Democracy are all that really matter.
Ride a bike, unlock the world.
https://www.rvplasticparts.com/
https://www.gpsdock1.com/
Re: small winch at loft
load test ....
I added about 100 lb to concrete barrel to reach 360 lb. no creaking or straining sounds. seems solid enough. I'm confident it could easily hold 1000 lb., but I don't need that much. I'll mark the beam, "Load tested 360 lb".
the wood chip outs on the backside were caused from the course drill I was using. need to paint those to make it look better.
now, I only wish we didn't have the rudder and elevator hinges attached with rivets poked into sheet metal and loaded in tension. I am really tempted to change mine to match drilled high strength screws, but for now I will keep inspecting and check my speed. several of the rudder flutter wreckage examinations show the rudder hinge rivets pulled thru and the hinges still attached to the rudder uniball.
Bee Gees - Stayin' Alive (Official Video)
https://youtu.be/I_izvAbhExY?si=6K2xM08d_NVu1D1M
Bee Gees - Night Fever (Official Video)
https://youtu.be/-ihs-vT9T3Q?si=hZ2ZcuKQpvHlZrHj
I added about 100 lb to concrete barrel to reach 360 lb. no creaking or straining sounds. seems solid enough. I'm confident it could easily hold 1000 lb., but I don't need that much. I'll mark the beam, "Load tested 360 lb".
the wood chip outs on the backside were caused from the course drill I was using. need to paint those to make it look better.
now, I only wish we didn't have the rudder and elevator hinges attached with rivets poked into sheet metal and loaded in tension. I am really tempted to change mine to match drilled high strength screws, but for now I will keep inspecting and check my speed. several of the rudder flutter wreckage examinations show the rudder hinge rivets pulled thru and the hinges still attached to the rudder uniball.
Bee Gees - Stayin' Alive (Official Video)
https://youtu.be/I_izvAbhExY?si=6K2xM08d_NVu1D1M
Bee Gees - Night Fever (Official Video)
https://youtu.be/-ihs-vT9T3Q?si=hZ2ZcuKQpvHlZrHj
Steve Melton
N531EM, RV9A, Superior O-320, WW 200RV prop, Slick mags, CHT 330F, EGT 1300F, B&C, 1300+ hours
Freedom and Democracy are all that really matter.
Ride a bike, unlock the world.
https://www.rvplasticparts.com/
https://www.gpsdock1.com/
N531EM, RV9A, Superior O-320, WW 200RV prop, Slick mags, CHT 330F, EGT 1300F, B&C, 1300+ hours
Freedom and Democracy are all that really matter.
Ride a bike, unlock the world.
https://www.rvplasticparts.com/
https://www.gpsdock1.com/