RivetBangers.com

Hi All,

I am doing my annual condition inspection of my 7A and have a couple of brake questions.

1. Does anyone know the Cleveland part number of the brake pads? I don't know if mine are worn too much yet but would like to have some pads ready. Vans has a "BRAKE PAD KIT 5:00X5" but would like to add something to an ACS order that I have to make instead of starting a separate order with Vans.

2. Which brake pad tool are others using to remove and re-set the pad rivets?

Any help would be greatly appreciated.

Thanks,

Tom-

Avery sells a set of pads and rivets:
http://www.averytools.com/pc-172-114-br ... t-kit.aspx



They also sell a rivet die to set the brake rivets:
http://www.averytools.com/pc-173-114-di ... ivets.aspx

Thanks Mike

For future info, I'll do what my mother told me not to. I'll answer my own question. For one/two seat RV's, the Cleveland part number is 66-106. The Rapco part number is RA66-106. There is a Rapco kit that contains 4 calipers and the required rivets RA66-106-4k. There is a Rapco brake rivet tool that looks like a C-clamp RA825. ACS sells all these parts.

Hope this helps someone in the future.

TomC wrote:For future info, I'll do what my mother told me not to. I'll answer my own question.

Tom: "I should have listened to my mother!"

Us: "Why? What did she say?"

Tom: "Don't know- never listened to her!"