DRDT-2 Scale
Posted: Thu Apr 09, 2009 3:02 pm
I missed that this was in a sticky thread the first time I replied (sorry Spike), so I'll start this one to answer your question Matt.matt_sturgis wrote:
Thanks Don,
Your write up is very helpful. Can you tell me more about the scale you attached to your DRDT-2?
The scale is nothing more than a piece of paper with 1 to 16 and some lines. I printed on a laser printer, cut it out, and wrapped some packing tape around it. I just use it to be able to set the preload the same each time based on the metal thickness, the thicker, the more preload I use. The trick if you can call it that, was printing it at several scales so when it was wrapped around the screw the gap between 16 and 1 was the same as between all the other numbers.