practice kit instructions

Joe Parish · Post by **Joe Parish** » Fri Sep 17, 2010 7:28 am

I ordered a practice kit from Orndorfs along with a video. I seem to have misplaced the instructions for the practice kit.

I am wondering if anyone would have a copy they could scan and email to me? The kit is from Vans and George just resells it apparently. The kit is the partial control surface, not the toolbox! My email is jparish@sio.midco.net if anyone has it. Thanks Joe

cjensen · Post by **cjensen** » Fri Sep 17, 2010 8:11 am

Hmm...Joe, if I can find mine, I'd be happy to send them to you as I built the same one. I'll look this weekend...

Bob Barrett · Post by **Bob Barrett** » Fri Sep 17, 2010 6:59 pm

Chad if you don't find yours I think I can find mine tomorrow. I will be working out in my shop and I think I found it last week, while looking for something else. I still have the kit because it came with my quick build kit and by then I had built my empenge. I have offered it to a relative but I could copy the plans very easily and e-mail them.

BSwayze · Post by **BSwayze** » Sat Sep 18, 2010 12:34 am

Maybe Vans has it on their download page?? Or if all else fails, someone there could email it to you if you ask them.

Joe Parish · Post by **Joe Parish** » Sat Sep 18, 2010 11:13 pm

I did try vans website but was unable to find it their. If all else fails, I will try to get them to send it to me. Thanks Joe

Wingman · Post by **Wingman** » Sun Sep 19, 2010 5:09 pm

Hi Joe, I am just starting out like you and I am in the process of gathering tools and practicing with them. Anyway, I scanned my instructions and emailed them to you. Let me know if you get them. Mike Matthews

Bob Barrett · Post by **Bob Barrett** » Sun Sep 19, 2010 6:17 pm

If Mathew's don't reach you let me know, and I will e-mail them to you.

Bob Barrett

Joe Parish · Post by **Joe Parish** » Sun Sep 19, 2010 7:32 pm

Got them Mike

Thanks a million

Wingman · Post by **Wingman** » Sun Sep 19, 2010 7:36 pm

No problem Joe. Glad to help and nice to be a part of a great group of folks.

cjensen · Post by **cjensen** » Mon Sep 20, 2010 9:52 am

Glad you have a set coming/in hand...I couldn't find mine this weekend.

Joe Parish · Post by **Joe Parish** » Mon Sep 20, 2010 10:28 am

Thanks for checking for me Chad and Bob, I appreciate it

Post by **Spike** » Tue Sep 21, 2010 9:07 am

Welcome wingman good to see you. Glad to have you join the group.

Wingman · Post by **Wingman** » Tue Sep 21, 2010 5:20 pm

Thank you for the warm welcome Spike. I've been visiting this site for a few months now and am very impressed with how everyone helps and encourages each other. Just more proof that I chose the right plane to build. Looking forward to the adventure.

Bob Barrett · Post by **Bob Barrett** » Wed Sep 22, 2010 3:59 pm

Welcome to Rivet Bangers Wingman. An RV-7 is a good pick and I hope you enjoy our company. We are glad to help you anyway we can

RivetBangers.com

practice kit instructions

practice kit instructions

Practice Kit Instructions

Van's Practice Instructions