?????

A forum in which to discuss topics specific to the assembly of the RV 4.
Post Reply
Tom Harp
Class G
Posts: 44
Joined: Tue Nov 16, 2004 8:34 am

?????

Post by Tom Harp »

Hi again Scott
Below(Ihope) is a oic, and I was wondering about the large 1"x1" angle that attaches to the firewall & the bulkhead in the pic. It looks like it maybe should attach (at the bulkhead as in the pic so that the skin on top of it would be flush all across it, but the plans show it as in pic #. Youn remember -what you did here?
Thanks
Tom

"[img]"vC:\Documents%20and%20Settings\Tom%20Harp\My%20Docum[img][/img]
Last edited by Tom Harp on Thu Aug 26, 2010 7:09 pm, edited 1 time in total.

User avatar
svanarts
Air Marshall
Posts: 1512
Joined: Wed Oct 27, 2004 5:19 pm
Location: Modesto, CA
Contact:

Post by svanarts »

Sorry Tom, your picture didn't come through. You need to upload it first.
Scott VanArtsdalen
Token Heretic
Nirvana Rodeo / Dudek Universal
S-6ES N612SV - GONE but not forgotten
RV-4 N311SV - SOLD

User avatar
svanarts
Air Marshall
Posts: 1512
Joined: Wed Oct 27, 2004 5:19 pm
Location: Modesto, CA
Contact:

Post by svanarts »

I'm pretty sure I attached it per drawing. However, the guiding principle on these things is make sure you build it from the center out, and from the outside in. Meaning, make sure that it is built such that the skins on the outside all fit together flush and nice. Maybe when you get your other pictures to upload I can be more helpful. :|
Scott VanArtsdalen
Token Heretic
Nirvana Rodeo / Dudek Universal
S-6ES N612SV - GONE but not forgotten
RV-4 N311SV - SOLD

Post Reply