OSH 2015

A place to plan social gatherings, flying events, etc.
Post Reply
User avatar
captain_john
Sparky
Posts: 5880
Joined: Sun Oct 31, 2004 9:17 am
Location: KPYM

OSH 2015

Post by captain_john »

Who else is going?

I will be there! I will be flying my plane there. First time!!!

I want to see the B-52!

http://www.eaa.org/en/airventure/eaa-ai ... in-oshkosh

Wednesday for Black Otter again?

See you all there!

:) CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!

User avatar
painless
Class C
Posts: 701
Joined: Sun Mar 06, 2005 12:42 pm
Location: Peshtigo, Wisconsin

Post by painless »

I'll be there, as usual. Cutting my week short tho, as I'm marrying off my second of three daughters on the 25th.

Otter on Wednesday works for me!

Looking forward to seeing the plane CJ
Jeff Orear
RV6A N782P
Hatz Classic, Welding fuselage
Hatz build log. https://eaabuilderslog.org/?blproject&p ... GNCwv&sid=
Peshtigo, WI

User avatar
bruceh
Class D
Posts: 393
Joined: Sun Apr 06, 2008 11:11 pm
Location: Ramona, CA
Contact:

Post by bruceh »

Fingers crossed, I will be there. Don't know when I'll show up or how long I'll stay. Lots of research and planning for me to do before then! What is the voice of experience here? I don't mind pitching a tent and camping, but after a few days I'm sure I will be ready for a nice bed.
Bruce Hill
RV-9A N5771H flying over 1100 hours!
Build Log at http://www.overthehills.com/RV-9A-Project
Blog at https://flyingoverthehills.wordpress.com/
EAA Tech Counselor, A&P

User avatar
leffler
Class E
Posts: 188
Joined: Sat Sep 19, 2009 10:31 pm
Location: KDLZ
Contact:

Post by leffler »

At the moment, it looks like Sunday through Wednesday for me, but that's subject to change as we get closer.
Bob Leffler
RV-10 - Flying
http://mykitlog.com/rleffler

User avatar
Joe Parish
Class D
Posts: 311
Joined: Wed Apr 21, 2010 3:42 pm
Location: Sioux Falls SD

Osh

Post by Joe Parish »

Hoping to get there. We have a grandchild due that week. Hoping it blesses us with an early arrival.
Joe
N525XC reserved
Empennage done
wings done
Fuse in progress
RV-9A

User avatar
bullojm1
Chief Rivet Banger
Posts: 1357
Joined: Sat Mar 25, 2006 6:37 pm
Location: KDMW
Contact:

Post by bullojm1 »

I'll be there, in HBC. I will plan my week around the Otter on Wednesday!
Mike Bullock
http://www.rvplane.com
RV-7 | Superior IO-360 | Whirlwind 200RV
Garmin GTN650 | GRT Dual Sport SX EFIS
Status: FLYING!

stevewiz
Class E
Posts: 63
Joined: Thu Sep 19, 2013 3:37 pm
Location: appleton,wisconsin

Post by stevewiz »

I will be at the otter again this year hopefully with both my sons(middle one should be home on leave) . Not sure if I will do the 72oz again but it did feed me for 4 days. Looking forward to seeing everyone
RV-7 N71SW reserved
Started on 10/8/2013
Working on Fuselage as of 5/10/15 95%done
started finish kit on 7/1/16
engine on order from Barett.Will be shown at their EAA booth and then delivered to us after show

User avatar
bruceh
Class D
Posts: 393
Joined: Sun Apr 06, 2008 11:11 pm
Location: Ramona, CA
Contact:

Maybe next year?

Post by bruceh »

Looks like I'm out for going to Oshkosh this year. Bummer!
Bruce Hill
RV-9A N5771H flying over 1100 hours!
Build Log at http://www.overthehills.com/RV-9A-Project
Blog at https://flyingoverthehills.wordpress.com/
EAA Tech Counselor, A&P

User avatar
BSwayze
Class C
Posts: 581
Joined: Wed Jun 27, 2007 5:15 am
Location: Portland, Oregon
Contact:

Post by BSwayze »

At nearly the last minute, a friend offered me a seat in his brand new RV-7, so I'm coming to Osh for the first time! I've been dreaming about it for years. I'll look forward to seeing as many of you as possible while I'm there. We're leaving here Tues. morning, with a planned arrival about 6:30 PM, if all goes well with weather and so on. :)
Bruce Swayze
Portland, Oregon
http://www.BrucesRV7A.com
RV-7A Working on Firewall Forward

User avatar
captain_john
Sparky
Posts: 5880
Joined: Sun Oct 31, 2004 9:17 am
Location: KPYM

Post by captain_john »

Image

Hey All,

Looking forward to seeing everyone!

I am especially looking forward to dinner on Wednesday night!

We have some new guys attending and will need another car. We have one Dodge Caravan but not everyone will fit in it.

8) CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!

User avatar
Brantel
Class B
Posts: 1029
Joined: Wed Aug 30, 2006 3:23 pm
Location: Newport, TN

Post by Brantel »

I need a ride ..... 4 2 3 608 3 6 4 5
Brantel (Brian Chesteen),
RV12-IS, #121606, N912BC - Building Now!
RV10, #41942, N????? - Project Sold
RV-7/TU, #72823, N159SB - SOLD

User avatar
painless
Class C
Posts: 701
Joined: Sun Mar 06, 2005 12:42 pm
Location: Peshtigo, Wisconsin

Post by painless »

I will have room for three. CJ, do you and mikey still need rides? Eric S may be able to drive too.

BTW. The Otter has been officially notified/warned.....
Jeff Orear
RV6A N782P
Hatz Classic, Welding fuselage
Hatz build log. https://eaabuilderslog.org/?blproject&p ... GNCwv&sid=
Peshtigo, WI

User avatar
captain_john
Sparky
Posts: 5880
Joined: Sun Oct 31, 2004 9:17 am
Location: KPYM

Post by captain_john »

Jeff, I think we have a ride. I posted some information in the headcount thread. Looking forward to seeing you soon! I am heading to the banquet right now.

:) CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!

User avatar
painless
Class C
Posts: 701
Joined: Sun Mar 06, 2005 12:42 pm
Location: Peshtigo, Wisconsin

Post by painless »

Ok CJ. Let me know otherwise. Brian, you out there? Still need a ride?
Jeff Orear
RV6A N782P
Hatz Classic, Welding fuselage
Hatz build log. https://eaabuilderslog.org/?blproject&p ... GNCwv&sid=
Peshtigo, WI

User avatar
Brantel
Class B
Posts: 1029
Joined: Wed Aug 30, 2006 3:23 pm
Location: Newport, TN

Post by Brantel »

Yes sir I do

Name the time and place and I will be there.
Brantel (Brian Chesteen),
RV12-IS, #121606, N912BC - Building Now!
RV10, #41942, N????? - Project Sold
RV-7/TU, #72823, N159SB - SOLD

User avatar
painless
Class C
Posts: 701
Joined: Sun Mar 06, 2005 12:42 pm
Location: Peshtigo, Wisconsin

Post by painless »

Be at my campsite at 5:00 ish. Same spot where the beer bash was a couple years ago. 44th street south of Lindbergh. Look for my maroon Suburban and a popup with pink steps :roll:

Trouble is, I probably won't recognize you!
Jeff Orear
RV6A N782P
Hatz Classic, Welding fuselage
Hatz build log. https://eaabuilderslog.org/?blproject&p ... GNCwv&sid=
Peshtigo, WI

User avatar
captain_john
Sparky
Posts: 5880
Joined: Sun Oct 31, 2004 9:17 am
Location: KPYM

Post by captain_john »

Thanks Jeff! Looks like it is otherwise. The guy I was counting on cannot be counted on. I'm glad I can count on you! See you tomorrow! I will have Mike buy you a beer! Lol

;) CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!

User avatar
painless
Class C
Posts: 701
Joined: Sun Mar 06, 2005 12:42 pm
Location: Peshtigo, Wisconsin

Post by painless »

So you need a ride now too CJ? Just making sure I don't leave without you.
How about Mikey?
Bullock can buy me a beer only if it comes with one of those barmaids from the sos tent 👍
Jeff Orear
RV6A N782P
Hatz Classic, Welding fuselage
Hatz build log. https://eaabuilderslog.org/?blproject&p ... GNCwv&sid=
Peshtigo, WI

Post Reply