Dimpling Firewall for F-867
Dimpling Firewall for F-867
How are you guys dimpling this after drilling for the Cooling Ramp? Buck-dimple or NAS1097AD3 (doesn't seem strong enough) with a macine c-sink is all I can think of.
RV-8 Fuse/Finish
Since I am building a -7, I can only guess your problem is trying to dimple the firewall without being able to get any decent dimpler in there. (Sorry for this post if this isn't what you mean).
Anyways, Avery sells a pop-rivet dimpler for 1/8" rivets:
http://www.averytools.com/pc-857-72-pop ... plers.aspx
To boot, their on sale, and if you spent $100, avery won't charge shipping.
Anyways, Avery sells a pop-rivet dimpler for 1/8" rivets:
http://www.averytools.com/pc-857-72-pop ... plers.aspx
To boot, their on sale, and if you spent $100, avery won't charge shipping.
Mike Bullock
http://www.rvplane.com
RV-7 | Superior IO-360 | Whirlwind 200RV
Garmin GTN650 | GRT Dual Sport SX EFIS
Status: FLYING!
http://www.rvplane.com
RV-7 | Superior IO-360 | Whirlwind 200RV
Garmin GTN650 | GRT Dual Sport SX EFIS
Status: FLYING!
It's amazing what happens when tools go into hibernation! Today I was radiusing the edge of a 063" strip with file after file, then all kinds of sandpaper. Just when I finished the first one, it dawned on me I had a 90 degree die grinder with a sandpaper wheel...DUH! The second strip I made was much easier, with much less swearing!
Mike Bullock
http://www.rvplane.com
RV-7 | Superior IO-360 | Whirlwind 200RV
Garmin GTN650 | GRT Dual Sport SX EFIS
Status: FLYING!
http://www.rvplane.com
RV-7 | Superior IO-360 | Whirlwind 200RV
Garmin GTN650 | GRT Dual Sport SX EFIS
Status: FLYING!