fuel line assembly?
fuel line assembly?
Is there a product (lubricant/sealer) of any sort to put on AN fuel fittings when tightening them up on the fuel lines?... also, is there a guide for torque settings?
Joe-
With flared AN fittings, you do not want ANY type of sealant or lubricant. If anything, you want it to be as clean as possible. What I typically do i s just wipe down the mating faces with acetone.
As far as Torque specifications go, this is a great guide I found on Van's site (and copied to my site):
http://rvplane.com/pdf/Torque_Spec_Alum ... ttings.pdf
With flared AN fittings, you do not want ANY type of sealant or lubricant. If anything, you want it to be as clean as possible. What I typically do i s just wipe down the mating faces with acetone.
As far as Torque specifications go, this is a great guide I found on Van's site (and copied to my site):
http://rvplane.com/pdf/Torque_Spec_Alum ... ttings.pdf
Mike Bullock
http://www.rvplane.com
RV-7 | Superior IO-360 | Whirlwind 200RV
Garmin GTN650 | GRT Dual Sport SX EFIS
Status: FLYING!
http://www.rvplane.com
RV-7 | Superior IO-360 | Whirlwind 200RV
Garmin GTN650 | GRT Dual Sport SX EFIS
Status: FLYING!
- Lorin Dueck
- Class D
- Posts: 252
- Joined: Sun Dec 25, 2005 2:12 pm
- Location: San Jose, CA
- Contact: