prop spinner screw spacing

A forum in which to discuss topics specific to the assembly of the RV 9/9A
Post Reply
Joe Casey
Class G
Posts: 25
Joined: Sat Oct 06, 2007 11:03 pm

prop spinner screw spacing

Post by Joe Casey »

I am using a 3 blade Catto prop, and unsure of the screw spacing on the front spinner bulkhead.
The plans call for 6 screws, but that appears to be for the constant speed version install, and the bulkhead is quite a bit forward .... anybody out there have any info on this screw spacing, when the bulkhead is further aft?

User avatar
cjensen
Whiskey Victor
Posts: 5275
Joined: Sat Apr 23, 2005 10:36 pm
Location: Green Bay, WI

Post by cjensen »

I used six with my 3 blade Catto, worked out fine.
Chad Jensen
Missing my RV-7...
Vertical Power support
920.216.3699
http://verticalpower.com

Post Reply