Bag 1924

A forum in which to discuss topics specific to the assembly of the RV 9/9A
Post Reply
JOHN TIPTON
Class E
Posts: 92
Joined: Thu Jun 08, 2006 4:46 pm
Location: Torquay England

Bag 1924

Post by JOHN TIPTON »

Hi Guys

Can someone remind me what Bag 1924 (wing hardware - RV9a) is for, consisting of #8 round head screws, and platenuts.

Best regards

John :bang:

User avatar
Joe Parish
Class D
Posts: 311
Joined: Wed Apr 21, 2010 3:42 pm
Location: Sioux Falls SD

Post by Joe Parish »

I believe they are for the fuel tank access plate and the fuel sender. Drawing #12 right side view. Hope that helps.
Joe
N525XC reserved
Empennage done
wings done
Fuse in progress
RV-9A

User avatar
smittysrv
Class D
Posts: 287
Joined: Sat Sep 03, 2005 7:10 am
Contact:

Post by smittysrv »

Hi John,

You'll also use those screws and nutplates in multiple places on the fuselage. I think they decided to give you all the screws and nutplates that you need for both the wings and fuselage.

Smitty

User avatar
bruceh
Class D
Posts: 393
Joined: Sun Apr 06, 2008 11:11 pm
Location: Ramona, CA
Contact:

Post by bruceh »

I don't know. I've finished the fuselage and I still haven't run out of those screws. :mrgreen:
Bruce Hill
RV-9A N5771H flying over 1100 hours!
Build Log at http://www.overthehills.com/RV-9A-Project
Blog at https://flyingoverthehills.wordpress.com/
EAA Tech Counselor, A&P

JOHN TIPTON
Class E
Posts: 92
Joined: Thu Jun 08, 2006 4:46 pm
Location: Torquay England

Bag 1924

Post by JOHN TIPTON »

Thanks guys

John

Post Reply