...looking to mooch

A forum to discuss the installation and maintenance of the O-320, O-360, & O-540 engines and their variants.
Post Reply
User avatar
captain_john
Sparky
Posts: 5880
Joined: Sun Oct 31, 2004 9:17 am
Location: KPYM

...looking to mooch

Post by captain_john »

Hey, does anyone have any desiccant plugs that they aren't using anymore?

Yah, I know... I am cheap and shameless.

I know that if I had a set and wasn't using them anymore, I would offer them to another builder who needs them.

Sooooo, cough them up if you are done with them.

I will buy you a beer (or several) at OSH!

(of course, if you know me I would do that anyways)

:) CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!

User avatar
painless
Class C
Posts: 701
Joined: Sun Mar 06, 2005 12:42 pm
Location: Peshtigo, Wisconsin

Post by painless »

CJ:

I happen to have a set of what you desire. I'll have to scrounge them up at the hangar tomorrow. Shoot me an address to send them to.


You owe me big time, fella! :P
Jeff Orear
RV6A N782P
Hatz Classic, Welding fuselage
Hatz build log. https://eaabuilderslog.org/?blproject&p ... GNCwv&sid=
Peshtigo, WI

User avatar
captain_john
Sparky
Posts: 5880
Joined: Sun Oct 31, 2004 9:17 am
Location: KPYM

Post by captain_john »

Saweeet Doc!!! That didn't take long!

You are the best!!!

See you at the Otter to even up!!!

;) CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!

Bill H
Class G
Posts: 11
Joined: Sun Sep 10, 2006 6:56 pm
Location: Pembroke, MA

Post by Bill H »

John! there is a set of plugs in hanger 5 . 4 th draw down . You can have them.

User avatar
painless
Class C
Posts: 701
Joined: Sun Mar 06, 2005 12:42 pm
Location: Peshtigo, Wisconsin

Post by painless »

Bill H wrote:John! there is a set of plugs in hanger 5 . 4 th draw down . You can have them.
I'll hold off sending my set to you CJ until you check that out. They are all ready to go if you need them. Just let me know
Jeff Orear
RV6A N782P
Hatz Classic, Welding fuselage
Hatz build log. https://eaabuilderslog.org/?blproject&p ... GNCwv&sid=
Peshtigo, WI

User avatar
captain_john
Sparky
Posts: 5880
Joined: Sun Oct 31, 2004 9:17 am
Location: KPYM

Post by captain_john »

Ha!

OMG! They are in my hangar and I didn't even know it! ha!

Thanks guys!!!

Billy, I will check that out next time I am up there.

Jeff, thanks anyways. If Billy says they are there... they are there!

What a great bunch of guys, these RV'ers!

:) CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!

Post Reply