What about Air Vents?

A forum for the proverbial airport bum who just wants to talk about anything and everything related to flying. Introduce yourself here !!

Post Reply
User avatar
BSwayze
Class C
Posts: 581
Joined: Wed Jun 27, 2007 5:15 am
Location: Portland, Oregon
Contact:

What about Air Vents?

Post by BSwayze »

I'm at a point where I need to decide whether to keep the plastic air vents that come from Vans, or upgrade to something better. What's the consensus with all of you on air vents? Did you keep the standard ones and use RTV to make a better seal, or did you upgrade? If so, which ones did you get? Are you happy with your choice? Would you do something different?

My head is swimming as I contemplate another choice here. Many thanks for your replies!
Bruce Swayze
Portland, Oregon
http://www.BrucesRV7A.com
RV-7A Working on Firewall Forward

User avatar
Brantel
Class B
Posts: 1030
Joined: Wed Aug 30, 2006 3:23 pm
Location: Newport, TN

Post by Brantel »

I upgraded to the larger Stein ones...They are the bomb!!
Brantel (Brian Chesteen),
RV12-IS, #121606, N912BC - Building Now!
RV10, #41942, N????? - Project Sold
RV-7/TU, #72823, N159SB - SOLD

User avatar
bullojm1
Chief Rivet Banger
Posts: 1374
Joined: Sat Mar 25, 2006 6:37 pm
Location: KDMW
Contact:

Post by bullojm1 »

I went with the large ones from SteinAir as well. They are really nicely made. The ones from Vans are just junk. I think I bought them from Aircraft Spruce for less than Stein sells them for, FYI.
Mike Bullock
http://www.rvplane.com
RV-7 | Superior IO-360 | Whirlwind 200RV
Garmin GTN650 | GRT Dual Sport SX EFIS
Status: FLYING!

User avatar
Lycosaurus
Class G
Posts: 34
Joined: Sat Sep 08, 2007 9:54 am
Location: Ottawa, Canada

Small vents from Steinair

Post by Lycosaurus »

I went with the small vents from Stein. One of the employees at Stein said that he experienced both the small vents and large vents in an RV. He claims that the smaller ones seemed to blow more air and it felt cooler than the large one. He also claimed that the larger ones were more appropriate for slower moving aircraft.

After two summers with the small ones, we are quite happy with them. Mind you, we live in Canada and our summers are not as hot as in Texas for instance, however we do not use a canopy shade.

The Vans air vents are pure garbage. You have to modifiy them, then add sealant to the butterfly so it seals (somewhat). The installation is a pain as well. The Stein ones are just so easy to install... worth the bucks.
Alfio
RV-9A, first flight Dec. 18, 2008
TT (tach) over 800 hrs.
Ottawa, Canada

User avatar
cjensen
Whiskey Victor
Posts: 5275
Joined: Sat Apr 23, 2005 10:36 pm
Location: Green Bay, WI

Post by cjensen »

I have the small vents from Aveo, and they BLOW really good air. At altitude, I actually close them down a bit to keep the flow to a manageable level, and it's plenty cool...really happy with them.

8)
Chad Jensen
Missing my RV-7...
Vertical Power support
920.216.3699
http://verticalpower.com

User avatar
captain_john
Sparky
Posts: 5880
Joined: Sun Oct 31, 2004 9:17 am
Location: KPYM

Post by captain_john »

Bill has the vans plastic ones. They blow just fine. But that really isn't the problem, is it?

The problem is closing them with a tight seal from what I understand. I haven't tried closing them in this heat and nor would I want to. I will let you know this winter how they are.

I bought the black aluminum ones from Van fr my -7. No idea how they perform though but they look great in the box!

:) CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!

User avatar
hydroguy2
Class B
Posts: 1307
Joined: Mon Sep 10, 2007 11:13 pm
Location: Townsend, Montana

Post by hydroguy2 »

Steinair large vents. and I'm a budget builder. But this was one area where the Vans didn't cut the mustard.

Image

writing a check only hurts for a few minutes. the pain of poor quality crap will last forever
Brian
Townsend, MT

User avatar
Lycosaurus
Class G
Posts: 34
Joined: Sat Sep 08, 2007 9:54 am
Location: Ottawa, Canada

Post by Lycosaurus »

captain_john wrote:....The problem is closing them with a tight seal from what I understand. ...
:) CJ
I agree, the Stein vents seal very well. I have flown in -20C weather and I was real glad I did not go with the Vans type. I bought the silicone sealant for modifying Vans vents but then heard of the marginal results some people were having with them. I also did not want to use one of the other suggested solution ..... a bathtub stopper.

I have no air coming in from the front of the cabin, however I have yet to seal a leak for the rear canopy... and we certainly can feel that breeze coming in, especially in winter :o

After-market vents .... well worth the money.
Alfio
RV-9A, first flight Dec. 18, 2008
TT (tach) over 800 hrs.
Ottawa, Canada

User avatar
BSwayze
Class C
Posts: 581
Joined: Wed Jun 27, 2007 5:15 am
Location: Portland, Oregon
Contact:

Post by BSwayze »

Wow, Gentlemen,

Thank you SO MUCH for all the responses! This is why I love Rivetbangers. I am definitely going to upgrade to something better, after hearing from all of you.

I'll post something later on to let you know what I come up with.
Bruce Swayze
Portland, Oregon
http://www.BrucesRV7A.com
RV-7A Working on Firewall Forward

User avatar
painless
Class C
Posts: 703
Joined: Sun Mar 06, 2005 12:42 pm
Location: Peshtigo, Wisconsin

Post by painless »

I have the black anodized aluminum units offered by Van's. IMHO they're the right size and provide plenty of cooling air. More importantly, they seal very well in the Wisconsin winters around here.

Definitely ditch the plastic cheapies.
Jeff Orear
RV6A N782P
Hatz Classic, Welding fuselage
Hatz build log. https://eaabuilderslog.org/?blproject&p ... GNCwv&sid=
Peshtigo, WI

User avatar
BSwayze
Class C
Posts: 581
Joined: Wed Jun 27, 2007 5:15 am
Location: Portland, Oregon
Contact:

Post by BSwayze »

Thanks, Jeff!

I looked at those, and they definitely look very nice. They currently cost $150 apiece, compared to $125 for Steins, so it's $50 bucks more for a pair of them. They will need to be cut down on one corner just like the plastic ones, too. So that kind of tilts the scale toward Steins' vents. I'm glad to hear they seal so well in Wisconsin winters, though. That's a HUGE selling point.
Bruce Swayze
Portland, Oregon
http://www.BrucesRV7A.com
RV-7A Working on Firewall Forward

Bob Barrett
Class C
Posts: 625
Joined: Sat Nov 13, 2004 8:37 pm
Location: Sartell MN

Post by Bob Barrett »

I have the Van's plastic and I used the RTV sealant and it hasn't been a problem in Minnesota Winters. However we didn't get to do a lot of Winter flying this past Winter because the hanger door froze shut. I have two heaters in my airplane it is the warmest airplane we have flown in. We don't fly unless it is 20 degrees F or warmer. I have the sliding canopy and did not seal the rear of it. We think one of the reasons its so warm is that cold air goes out around the back. Just a theroy.

Post Reply