Well, it's happened. I have begun construction on a Hatz Classic biplane. The void left after completing my 6A was too much to bear.
This is once again going to be a long-term project. Even though it is a wood, tube and fabric airplane, the ailerons are still aluminum. Thus I'll STILL be a rivetbanger!
I've set up a website to log my construction: http://websites.expercraft.com/painless/
Rather basic stuff so far. Just making all the parts needed for rib construction.
I really need to have my head examined........
Repeat Offender
Repeat Offender
Jeff Orear
RV6A N782P
Hatz Classic, Welding fuselage
Hatz build log. https://eaabuilderslog.org/?blproject&p ... GNCwv&sid=
Peshtigo, WI
RV6A N782P
Hatz Classic, Welding fuselage
Hatz build log. https://eaabuilderslog.org/?blproject&p ... GNCwv&sid=
Peshtigo, WI
Yee-haw! There's nothing like that wind-in-your-hair low and slow flying. You're going to have the best of all worlds; a fast, get-there airplane, and a low and slow kicking around the country on a Sunday afternoon airplane.
Scott VanArtsdalen
Token Heretic
Nirvana Rodeo / Dudek Universal
S-6ES N612SV - GONE but not forgotten
RV-4 N311SV - SOLD
Token Heretic
Nirvana Rodeo / Dudek Universal
S-6ES N612SV - GONE but not forgotten
RV-4 N311SV - SOLD
Yeah Chad, I suppose Wicks is going to get to know the both of us pretty well over the next few years! 

Jeff Orear
RV6A N782P
Hatz Classic, Welding fuselage
Hatz build log. https://eaabuilderslog.org/?blproject&p ... GNCwv&sid=
Peshtigo, WI
RV6A N782P
Hatz Classic, Welding fuselage
Hatz build log. https://eaabuilderslog.org/?blproject&p ... GNCwv&sid=
Peshtigo, WI
- captain_john
- Sparky
- Posts: 5880
- Joined: Sun Oct 31, 2004 9:17 am
- Location: KPYM
-
- Chief Rivet Banger
- Posts: 4013
- Joined: Thu Oct 14, 2004 8:40 pm
- Location: Baltimore, MD
- Contact:
Nifty! The Hatz has some of the most classy lines of all the bipes. Actually, you could really build one of those things and hang it uncovered as a work of art. Nice choice. Keep us in the loop!! 
Spike

Spike
http://www.rivetbangers.com - Now integrating web and mail!
Current Build: 2 years into a beautiful little girl
Current Build: 2 years into a beautiful little girl
I'm barely halfway through...
...but I've already picked out my next project -
http://www.airdromeairplanes.com/sopwithcamel.html
My wife wasn't thrilled when I told her.

http://www.airdromeairplanes.com/sopwithcamel.html
My wife wasn't thrilled when I told her.


Dave Setser
Avionics, Firewall Forward
http://www.mightyrv.com
Putting the "slow" in slow-build since 2004
Avionics, Firewall Forward
http://www.mightyrv.com
Putting the "slow" in slow-build since 2004
-
- Chief Rivet Banger
- Posts: 4013
- Joined: Thu Oct 14, 2004 8:40 pm
- Location: Baltimore, MD
- Contact:
Sweeet dude!
Spike
Spike
http://www.rivetbangers.com - Now integrating web and mail!
Current Build: 2 years into a beautiful little girl
Current Build: 2 years into a beautiful little girl
Re: I'm barely halfway through...
Thermos wrote:
My wife wasn't thrilled when I told her.![]()
Mine wasn't too surprised. She knows how much of a Sickie I am regarding aviation.
Cool project Dave! I have a feeling you'll be in the air sooner than I will.
Jeff Orear
RV6A N782P
Hatz Classic, Welding fuselage
Hatz build log. https://eaabuilderslog.org/?blproject&p ... GNCwv&sid=
Peshtigo, WI
RV6A N782P
Hatz Classic, Welding fuselage
Hatz build log. https://eaabuilderslog.org/?blproject&p ... GNCwv&sid=
Peshtigo, WI