Improving Cabin Heat

A forum in which to discuss topics specific to the assembly of the RV 7/7A.
timotb
Class E
Posts: 61
Joined: Wed Jan 09, 2008 9:04 pm

Improving Cabin Heat

Postby timotb » Thu Mar 26, 2015 5:14 pm

I'm using an IO-360-M1B on my seven with a single heater can off the number 1 cylinder (forward right cylinder) as supplied by Vans. Not enough heat temperature and flow.

Inside the can, the exhaust is wrapped with 15' copper #8 gauge wire in hopes of capturing more radiant heat. Doesn't work so well, seems to reduce the flow.

Thinking about adding a second Can in series from another cylinder.

Any other ideas?

User avatar
captain_john
Sparky
Posts: 5879
Joined: Sun Oct 31, 2004 9:17 am
Location: KPYM

Postby captain_john » Thu Mar 26, 2015 9:15 pm

I used "Header Wrap" from the auto parts store.

Get some and wrap it around your heat exchanger ONLY... not your pipes.

It worked great for me. No need to install anything else.

Data point: I have a 4 pipe Vetterman system and the heater box encloses 2 pipes, not one.

Never the less, It should still work for you.

:) CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!

martix021
Class G
Posts: 1
Joined: Sat Jun 15, 2019 12:06 am

Re: Improving Cabin Heat

Postby martix021 » Sat Jun 15, 2019 12:10 am

timotb wrote:I'm using an IO-360-M1B on my seven with a single heater meilleurs credits travaux can off the number 1 cylinder (forward right cylinder) as supplied by Vans. Not enough heat temperature and flow.

Inside the can, the exhaust is wrapped with 15' copper #8 gauge wire in hopes of capturing more radiant heat. Doesn't work so well, seems to reduce the flow.

Thinking about adding a second Can in series from another cylinder.

Any other ideas?

I’m a new member here and I think that this site is a very good one because there are many different subjects and various tips!
Thanks!


Return to “RV 7/7A”

Who is online

Users browsing this forum: No registered users and 2 guests