I wanna meet the guy...

A forum for the proverbial airport bum who just wants to talk about anything and everything related to flying. Introduce yourself here !!

User avatar
captain_john
Sparky
Posts: 5880
Joined: Sun Oct 31, 2004 9:17 am
Location: KPYM

I wanna meet the guy...

Post by captain_john »

who packs the paper into the kit shipments!

I swear that there were at least TWO 100' long sheets of paper in my fuse crate!

Does Van know that this is happening? Honest to GOD... I am no tree hugger but is this really necessary?

Maybe?

Like the anally retentive kit builder that I am, I folded most of it up to cover my work benches with. I was also considering saving the spring steel strapping used to keep the crates bound... but I didn't. I will probably have a need for it tomorrow!

:lol: CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!

User avatar
jim_geo
Class C
Posts: 843
Joined: Fri Nov 12, 2004 9:58 pm
Location: KCVO

Post by jim_geo »

John, Van probably thinks that the cost of a little paper is cheaper for him and less hassle for you if he uses a bunch to pack with rather than taking chances with parts that are pretty fragile. By the way I thought you were getting a slow build fuse. Remember to recycle everyone. :|

User avatar
captain_john
Sparky
Posts: 5880
Joined: Sun Oct 31, 2004 9:17 am
Location: KPYM

Post by captain_john »

Jim,

I "DID" get the SB kit.

Yes, a little extra paper will go a long way in mitigating damages. Nevertheless, I have a dented skin. The left side skin, way down by the tailcone is GOINKED! It oilcans and everything!

Also I have two welds that failed inspection. One is on the tailwheel assembly! I suppose it could be worse. It could be on the nosewheel gear!

:wink: :lol: CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!

Dan A
Class D
Posts: 310
Joined: Sun Oct 24, 2004 6:18 pm
Location: Cheney, WA USA

Post by Dan A »

CJ,
Just call Van's and they will send you a new skin and the new welded parts. You can go ahead with the fuselage construction as the new parts will be there before you need them. Just keep yer head up and pound the rivits! :) Dan, Flew two young eagles Saturday and showed them the circular rainbows. They loved it!

User avatar
captain_john
Sparky
Posts: 5880
Joined: Sun Oct 31, 2004 9:17 am
Location: KPYM

Post by captain_john »

Dan, Wilco!

Still working on the wings, but the fuse will be on tap soon!

Thanks for the pep talk!

:mrgreen: CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!

Spike
Chief Rivet Banger
Posts: 4013
Joined: Thu Oct 14, 2004 8:40 pm
Location: Baltimore, MD
Contact:

Post by Spike »

Didn't they tell you John? That paper acts as the seat stuffing. Dont throw it away. :o
http://www.rivetbangers.com - Now integrating web and mail!
Current Build: 2 years into a beautiful little girl

User avatar
captain_john
Sparky
Posts: 5880
Joined: Sun Oct 31, 2004 9:17 am
Location: KPYM

Post by captain_john »

Hahahha,

I will be sitting PRETTY TALL, 'cause thatsa lotta pay pah! (Cape Cod accent)

:lol: CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!

User avatar
cjensen
Whiskey Victor
Posts: 5275
Joined: Sat Apr 23, 2005 10:36 pm
Location: Green Bay, WI

Post by cjensen »

believe me...that cape cod accent is real!! :lol:
Chad Jensen
Missing my RV-7...
Vertical Power support
920.216.3699
http://verticalpower.com

Spike
Chief Rivet Banger
Posts: 4013
Joined: Thu Oct 14, 2004 8:40 pm
Location: Baltimore, MD
Contact:

Post by Spike »

No joke. I could identify John in a room with my eyes closed just listenin talk about his arevee.
http://www.rivetbangers.com - Now integrating web and mail!
Current Build: 2 years into a beautiful little girl

jimrobinette
Class E
Posts: 94
Joined: Wed Nov 17, 2004 3:26 am
Location: Haymarket, VA
Contact:

Post by jimrobinette »

Believe me too! You should have been there last week when I was stuck in the garage with CJ, Thermos and Wicked Stick all at the same time!!! I was going nuts. I wanted to send them all back to school to learn how to pronounce the letter "r"! :)

The good thing about these three New Englanders is that they like good beer!

Take care,

Jim

User avatar
captain_john
Sparky
Posts: 5880
Joined: Sun Oct 31, 2004 9:17 am
Location: KPYM

Post by captain_john »

We know how to pronounce "R"...

ahhh!

:lol: CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!

User avatar
jim_geo
Class C
Posts: 843
Joined: Fri Nov 12, 2004 9:58 pm
Location: KCVO

Post by jim_geo »

I'd like to meet a pirate from New Englang. :rofl:

User avatar
captain_john
Sparky
Posts: 5880
Joined: Sun Oct 31, 2004 9:17 am
Location: KPYM

Post by captain_john »

Come on out this way Jim. I will buy you a beer!

:wink: CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!

User avatar
cjensen
Whiskey Victor
Posts: 5275
Joined: Sat Apr 23, 2005 10:36 pm
Location: Green Bay, WI

Post by cjensen »

that offah's good fah everibahdy, cahrect CJ? :lol:
Chad Jensen
Missing my RV-7...
Vertical Power support
920.216.3699
http://verticalpower.com

User avatar
cjensen
Whiskey Victor
Posts: 5275
Joined: Sat Apr 23, 2005 10:36 pm
Location: Green Bay, WI

Post by cjensen »

sorry CJ, had to! :P
Chad Jensen
Missing my RV-7...
Vertical Power support
920.216.3699
http://verticalpower.com

jimrobinette
Class E
Posts: 94
Joined: Wed Nov 17, 2004 3:26 am
Location: Haymarket, VA
Contact:

Post by jimrobinette »

I am attending the Naval War College here in RI, so we have people from around the world here, not to mention from around the country. Last week a classmate of mine from FL was out with his five year old son. When asked, his son said he left his jacket in the "cah". I thought his dad was going to come unglued! Next thing you know, he is correcting his son on the "proper" use of English. Funny to see.

User avatar
jim_geo
Class C
Posts: 843
Joined: Fri Nov 12, 2004 9:58 pm
Location: KCVO

Post by jim_geo »

I don't know how close this is but I'm going to be in Washington D.C. this weekend. Just for the weekend.

User avatar
4kilo
RB's First
Posts: 227
Joined: Mon Nov 08, 2004 10:32 am
Location: GPM (Grand Prairie, Texas)
Contact:

Post by 4kilo »

The worst part of all of those "r"s the New Englanders drop is they end up down here in Texas! As in, "Ah'm a fixin' to change mah oirl afore I drive to Warshington."
RV-8
N804PT - IO-360, Hartzell blended airfoil, GRT dual Horizon I & EIS, TruTrak ADI Pilot II
Flying - 950 hours!

User avatar
cjensen
Whiskey Victor
Posts: 5275
Joined: Sat Apr 23, 2005 10:36 pm
Location: Green Bay, WI

Post by cjensen »

:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
Chad Jensen
Missing my RV-7...
Vertical Power support
920.216.3699
http://verticalpower.com

User avatar
jim_geo
Class C
Posts: 843
Joined: Fri Nov 12, 2004 9:58 pm
Location: KCVO

Post by jim_geo »

Ever notice how these threads seem to take on a life of thier own. Remember to recycle gang. Once isn't enough. :evil:

Post Reply