So, can I still be a rivet banger?

A forum for the proverbial airport bum who just wants to talk about anything and everything related to flying. Introduce yourself here !!

Post Reply
User avatar
papakeith
Class D
Posts: 430
Joined: Thu Feb 16, 2006 9:15 pm
Location: Rhode Island
Contact:
Contact papakeith

So, can I still be a rivet banger?

Post by papakeith »

I can't (due to size limitations) build myself an RV. Not too sure that I would even if I could. I don't think it fits in with what I want to be able to do with an airplane.

So I went and bought some plans for a plane that did fit me and my mission. I cut the first formblock this weekend. Notice the required helper in the picture:P

Image


My question is, can I still hang out here? It's not an RV, but it is a aluminum rib/aluminum skin flush riveted wing. Seems to me lots of what y'all do here will transfer nicely to my project.

Puuuleeeaaaassseeee can I stay? :mrgreen:
Last edited by papakeith on Tue May 23, 2006 8:54 am, edited 2 times in total.
-------
RB's #1 heretic
www.bearhawk949.com
Top
User avatar
aparchment
Class C
Posts: 522
Joined: Tue Nov 15, 2005 9:43 pm

Wow!

Post by aparchment »

Wow Keith -- building from plans! Man you have my respect. I don't have the patience to do that anymore.

I would vote you in.

Antony
Top
User avatar
cjensen
Whiskey Victor
Posts: 5275
Joined: Sat Apr 23, 2005 10:36 pm
Location: Green Bay, WI

Post by cjensen »

I would vote that you stay as well! We would probably stand to learn a bit from a plans-built-aluminum-flush-riveted-airplane!! 8)

What is it??? :popcorn:
Chad Jensen
Missing my RV-7...
Vertical Power support
920.216.3699
http://verticalpower.com
Top
User avatar
papakeith
Class D
Posts: 430
Joined: Thu Feb 16, 2006 9:15 pm
Location: Rhode Island
Contact:
Contact papakeith

Post by papakeith »

The plane is a Bearhawk, a 4 seat aluminum wing, tube and fabric fuselage, High wing design.

Should be interesting. In 8 months or so I should have the wing parts made to the point where you guys get your kits when they are shipped.

Plans built seems to be the only way that I will get a plane to 1: fit me, and 2: move at an acceptable (to me) speed.

The plans call for anything from 150hp- 260hp. with a cruise from 135-155mph vne 175 Useful load 1300.

That, and plans are a cheap buy in for a guy like me who has the room and the desire but not neccessarily the bankroll to dive right in.
-------
RB's #1 heretic
www.bearhawk949.com
Top
User avatar
cjensen
Whiskey Victor
Posts: 5275
Joined: Sat Apr 23, 2005 10:36 pm
Location: Green Bay, WI

Post by cjensen »

8) I'm looking forward to learning more about your build, and the airplane!!
Chad Jensen
Missing my RV-7...
Vertical Power support
920.216.3699
http://verticalpower.com
Top
Spike
Chief Rivet Banger
Posts: 4013
Joined: Thu Oct 14, 2004 8:40 pm
Location: Baltimore, MD
Contact:
Contact Spike

Post by Spike »

Of course you can stay. We don't descriminate!
http://www.rivetbangers.com - Now integrating web and mail!
Current Build: 2 years into a beautiful little girl
Top
User avatar
jim_geo
Class C
Posts: 843
Joined: Fri Nov 12, 2004 9:58 pm
Location: KCVO

Post by jim_geo »

It's Rivetbangers not RVonlyrivetbangers. I'd love to watch your project.
Top
User avatar
captain_john
Sparky
Posts: 5880
Joined: Sun Oct 31, 2004 9:17 am
Location: KPYM

Post by captain_john »

I sixthe the motion for you to stay! You can be our token high winger!

At least it will be a tail dragger!

:evil:

Keith, keep in touch!

:mrgreen: CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
Top
User avatar
papakeith
Class D
Posts: 430
Joined: Thu Feb 16, 2006 9:15 pm
Location: Rhode Island
Contact:
Contact papakeith

Post by papakeith »

John, I've been working weekends on the farm. Planting season y'know. On the bright side the 12,000 strawberry plants are in the ground, as well as some new fencing for the horses and . . . and. . . you know the drill I'm sure. gotta make hay while the sun shines. Speaking of, it's about time to cut some hay. I'll have to add that to the list, plus the corn planting has commenced :)

I've been meaning to give you a call. I want to get back up your place to finish my tool box, and see your progress. Heck, you must have the fuselage half done by now.

Plus, I've got a CD with all the videos and pictures from the trip to sanford. Minus one landing attempt. :evil: Some decent pics on there.

oh yeah, I'm still trying to figure out how to put that third wheel up front where it belongs! :mrgreen:


signed,
Token
-------
RB's #1 heretic
www.bearhawk949.com
Top
User avatar
Snap
Class D
Posts: 256
Joined: Thu Nov 04, 2004 8:11 pm
Location: Perth. Australia

Post by Snap »

Don't listen to them Keith, THEY WANT YOUR BEER. LOOK OUT!!!! :beer:
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :rofl:

I'm sure that you have bigger brass ones than me. Plans? I bow before thee...........UUMMMM......UUUMMMM :good job:
RV-7A Emp
I would rather have a bottle in front of me than a frontal lobotomy.
Top
User avatar
svanarts
Air Marshall
Posts: 1512
Joined: Wed Oct 27, 2004 5:19 pm
Location: Modesto, CA
Contact:
Contact svanarts

Post by svanarts »

That's a nice looking plane. Kind of like a Pacer on steroids. Wish I had one of those right now.
Top
User avatar
JohnR
Class B
Posts: 1081
Joined: Mon Aug 29, 2005 3:22 pm
Location: Iowa

You better stay!

Post by JohnR »

We want to see this thing come together! Looks like a nice plane.
JohnR
RV-7A - Fuselage - SOLD, just not supposed to be
Numbers 6:24 - The LORD bless thee, and keep thee
Top
User avatar
papakeith
Class D
Posts: 430
Joined: Thu Feb 16, 2006 9:15 pm
Location: Rhode Island
Contact:
Contact papakeith

Post by papakeith »

Beer and brisket is part of the deal. I knew that going into it.

Thanks for the well wishes. I've ordered up a couple of sheets of aluminum, nothing left to do but build I s'pose.
-------
RB's #1 heretic
www.bearhawk949.com
Top
User avatar
aparchment
Class C
Posts: 522
Joined: Tue Nov 15, 2005 9:43 pm

wow!

Post by aparchment »

Brisket too! Heck why didn't you say so earlier Kieth.

John we gotta help poor Keith! LOL!

In all seriousness Keith, let us know when you need a hand.

Antony
Top
User avatar
papakeith
Class D
Posts: 430
Joined: Thu Feb 16, 2006 9:15 pm
Location: Rhode Island
Contact:
Contact papakeith

Post by papakeith »

If I ever get around to making it, I've got a killer beef jerky recipe I'm gonna share with CJ and friends. Cripes, is it any wonder I'm 300+:o


More progress.
I managed to cobble together a build site over the weekend. If you want to check it out I'd love some feedback.

www.salisburyfarm.com/bearhawk949

Ain't rany days good for getting stuff done?
I balanced all of the bank accounts, tried to fix my sons bonneville(bad fuel pump near as I can figure), then set about doing the final sanding on my form blocks.

I almost got all of the formblocks finished too.
-------
RB's #1 heretic
www.bearhawk949.com
Top
User avatar
captain_john
Sparky
Posts: 5880
Joined: Sun Oct 31, 2004 9:17 am
Location: KPYM

Post by captain_john »

Cool, Keith!!!

949 would make a cool tail number too! You should reserve something now!

Keep in touch and I am looking forward to some jerky!!!

:mrgreen: CJ
RV-7
Garmin G3X with VP-X & a TMX-IO-360 with G3i
It's all over but the flying! 800+ hours in only 3 years!
Top
User avatar
aparchment
Class C
Posts: 522
Joined: Tue Nov 15, 2005 9:43 pm

way to go

Post by aparchment »

Good job Keith! Keep chuggin' along.

Antony
Top
Post Reply

Return to “The Hangar”